The Use of Vapor Honing for Anodizing

In the process of anodizing a metal part, the surface of the piece is vapor honed to produce a high electromagnetic wave-absorbing layer. The grit used for the vapor honing is preferably of the 100 to 200 mesh size range. The resulting pattern has many peaks and valleys. These peaks and valleys give the metal a matte finish. Check out how does vapor honing work.
The process is also known as wet blasting. A wet blast cabinet consists of an enclosure, a water pump and a blast gun. The air is compressed to create an aggressive hone action. Different cabinets are used for different types of objects. Some are designed for copper and aluminum, while others are more suitable for aluminum. This process is used to create an anodized finish on metal parts.
A vapor hone is a method of removing oxide from metal surfaces. This process is similar to abrasive blasting, except that it uses a liquid rather than grit. This method involves a pumped slurry that is made up of water and abrasive particles. The resulting vapor hone finish can be very difficult to achieve, but the results can be remarkable.
A wet blast cabinet is necessary for vapor honing. This device consists of an enclosure, a pump, a blast gun, and a mechanism that compresses the air. The cabinet can be designed to handle various objects. Some are small and some are large, with some designed for copper and aluminum. However, it is important to understand that the resulting surface texture is very similar to a metal anodized.
The hone step involves removing a thin layer of oxide. The vapor hone is a more efficient method than traditional wet blasting. It is more effective than the conventional methods and can remove the oxide without harming the parent metal. There are many advantages to using a vapor hone. In addition to the benefits of a vapor honed finish, a vapor-honed finish can also reduce the amount of metal.
Vapor honing is a more efficient way to finish an anodized part. The slurry is pumped with air, which allows it to work more aggressively. It is a less expensive alternative to sandblasting, and it is more accurate than sandblasting. Consequently, it is the most efficient choice for anodizing. While vapor honed finishes are superior to wet blasting, they are not compatible with each other.
The vapor honed process is a cost-effective way to finish anodized parts. The process can be performed on an entire automobile or on individual components. It is not only effective for anodizing, but it can also be used on the exterior of buildings. The sandblasting method can also be applied to metal surfaces to make them more durable. It is an excellent alternative to the traditional anodizing process. Read vapor honing technologies weekend warrior.

Take this post for more insights: https://www.ehow.com/info_12198081_wet-vs-dry-sandblasting.html